Single-component water based chemical release agent designed for formwork surfaces, ensuring a clean release and smooth, hard, uniform concrete finish. It reduces blowholes and is non-staining.
NEORELEASE W is a high-performance, water based chemical release agent for smooth, uniform, and easy release of concrete from various types of formwork and moulds. It is specifically formulated for plywood, timber, and plastic-faced formwork, providing a clean release without staining or surface damage.
This white emulsion-based product contains emulsified mineral oils and non-hazardous chemicals that react chemically with cement to prevent adhesion between concrete and formwork. The result is a smooth, hard, and defect-free finish with minimal blowholes or surface imperfections.
NEORELEASE W is designed for high coverage efficiency and easy application, reducing labor time and improving concrete surface aesthetics. Its water-based formulation makes it safe, odor-free, and suitable for use in enclosed construction environments.
Unlike solvent-based agents, NEORELEASE W does not affect the bond strength or adhesion of coatings, sealers, or paints applied later. It is an ideal choice for architectural concrete, precast elements, and fair-faced concrete surfaces, ensuring professional results with environmental responsibility.
Advanced water based chemical release agent for concrete formwork
Provides smooth, clean, and non-staining surface finishes
Reduces blowholes and surface imperfections
Safe, eco-friendly formulation with low VOC content
High coverage rate for cost-effective application
Compatible with timber, plywood, and plastic-faced moulds
Does not affect subsequent surface treatments or coatings
Easy to apply with brush, roller, or spray equipment
Suitable for both site-cast and precast concrete applications
Architectural and exposed concrete surfaces
Precast and cast-in-situ concrete work
Structural columns, beams, and slabs
Fair-faced concrete projects requiring high finish quality
1. What is NEORELEASE W used for?
NEORELEASE W is a water-based chemical release agent that prevents concrete from sticking to formwork and moulds, ensuring a clean, easy release.
2. What types of formwork can NEORELEASE W be used on?
It is suitable for plywood, timber, and plastic-faced formwork, commonly used in concrete casting.
3. Does NEORELEASE W cause staining on concrete?
No. It is a non-staining formulation, ideal for architectural and fair-faced concrete surfaces.
4. Can NEORELEASE W affect adhesion of coatings or paints?
No. When applied correctly, it does not impair the adhesion of subsequent surface treatments.
5. What makes NEORELEASE W environmentally friendly?
It is a water-based, solvent-free emulsion with low VOCs and no hazardous fumes.
6. How does NEORELEASE W reduce blowholes?
It forms a uniform film on the formwork surface, reducing air entrapment and improving concrete finish quality.
7. Can it be used on steel moulds?
While optimized for plywood and plastic-faced formwork, it can be used on smooth steel moulds with proper surface preparation.
8. How should NEORELEASE W be applied?
Apply a thin, even coat using a brush, roller, or low-pressure spray before placing concrete.
9. What is the coverage rate?
Typical coverage ranges between 25–50 m² per liter, depending on formwork texture and absorption.
10. Who manufactures NEORELEASE W?
NEORELEASE W is manufactured by Royal Industries, a trusted supplier of formwork release agents and concrete surface solutions.
Store in a cool, dry area, out of direct sunlight, and protect from extreme temperatures.
Shelf life of up to 12 months when stored in unopened containers under recommended conditions.
We specialize in the manufacturing, design and supply of premium construction chemicals with a particular focus on high-performance waterproofing solutions.
